Level Coating installs hot-tire-proof epoxy and polyaspartic floor coatings across the Cleveland suburbs — diamond-ground, full-flake, and sealed in a single visit. Walk on it that night, park on it the next morning.
Every floor is diamond-ground, repaired, and coated with an industrial flake system — not a roll-on kit. Choose the finish that fits your space and budget.
A full-flake epoxy base with a clear top coat — durable, easy to clean, and available in dozens of chip blends to match your garage.
Learn more →Our premium 1-day system. Up to 4× more abrasion-resistant than epoxy, UV-stable, and flexible enough to survive Ohio's freeze-thaw winters.
Epoxy vs polyaspartic →The same chip-and-seal system works in basements, workshops, and commercial spaces — seamless, moisture-resistant, and wipe-clean.
Learn more →We mechanically profile the slab, fill cracks with structural polyurea, and degrease oil spots — the prep DIY kits skip, and the reason they fail.
A pigmented base goes down, then vinyl chips are broadcast to full refusal for that deep, even, showroom texture in your chosen color.
A UV-stable clear coat seals it all in. Foot traffic the same evening, vehicles the next morning. Backed by our 2-year workmanship warranty.
Our 1-day flake system starts at $6 per square foot. Here's a quick guide for typical Cleveland-area garages — your exact price is locked in after a free in-home visit.
| Garage size | Approx. area | Starting price |
|---|---|---|
| 1-car garage | ~250–300 sq ft | $1,500–$1,800 |
| 2-car garage | ~400–500 sq ft | $2,400–$3,000 |
| 3-car garage | ~600–750 sq ft | $3,600–$4,500 |
Final price depends on slab condition — old coatings, deep cracks, or oil saturation can adjust the quote. See the full cost guide →
Based in North Royalton, we install across Cuyahoga, Medina, and the surrounding suburbs. Find your city:
Most residential garages are completed in a single day. Because polyaspartic cures in hours, you can walk on the floor that evening and park on it the next morning.
No. Hot-tire pickup is the #1 failure of DIY epoxy kits. Our polyaspartic top coat bonds chemically to the base and shrugs off hot tires — the same coatings used in commercial garages.
Yes. Polyaspartic stays flexible in the cold, so it moves with the slab instead of cracking. Salt, brine, and snow-melt chemicals don't damage it.
Almost always. We diamond-grind the slab, fill cracks with structural polyurea, and degrease oil spots before coating. The full chip broadcast hides minor imperfections.
Our 1-day flake system starts at $6 per square foot — roughly $2,400–$3,000 for a standard 2-car garage. We give a free, fixed quote after a quick site visit. See the full cost guide.
Tell us about your garage and we'll send a fixed price after a quick visit — no surprises on install day. Most quotes within 24 hours.
(440) 390-8899 info@levelcoating.comBased in North Royalton, OH — serving Strongsville, Brecksville, Broadview Heights, Parma, Medina, Brunswick, Westlake, Rocky River & the Greater Cleveland suburbs.
